VPN or Dial-Up Error code 900 - The router is not running.

VPN or Dial-Up Error code 901 - The interface is already connected.

VPN or Dial-Up Error code 902 - The specified protocol identifier is not known to the router.

VPN or Dial-Up Error code 903 - The Demand-dial Interface Manager is not running.

VPN or Dial-Up Error code 904 - An interface with this name is already registered with the router.

VPN or Dial-Up Error code 905 - An interface with this name is not registered with the router.

VPN or Dial-Up Error code 906 - The interface is not connected.

VPN or Dial-Up Error code 907 - The specified protocol is stopping.

VPN or Dial-Up Error code 908 - The interface is connected and hence cannot be deleted.

VPN or Dial-Up Error code 909 - The interface credentials have not been set.

VPN or Dial-Up Error code 910 - This interface is already in the process of connecting.

VPN or Dial-Up Error code 911 - An update of routing information on this interface is already in progress.

VPN or Dial-Up Error code 912 - The interface configuration in invalid. There is already another interface that is connected to the same interface on the remote router.

VPN or Dial-Up Error code 913 - A Remote Access Client attempted to connect over a port that was reserved for Routers only.

VPN or Dial-Up Error code 914 - A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.

VPN or Dial-Up Error code 915 - The client interface with this name already exists and is currently connected.

VPN or Dial-Up Error code 916 - The interface is in a disabled state.

VPN or Dial-Up Error code 917 - The authentication protocol was rejected by the remote peer.

VPN or Dial-Up Error code 918 - There are no authentication protocols available for use.

VPN or Dial-Up Error code 919 - The remote computer refused to be authenticated using the configured authentication protocol. The line has been disconnected.

VPN or Dial-Up Error code 920 - The remote account does not have Remote Access permission.

VPN or Dial-Up Error code 921 - The remote account has expired.

VPN or Dial-Up Error code 922 - The remote account is disabled.

VPN or Dial-Up Error code 923 - The remote account is not permitted to logon at this time of day.

VPN or Dial-Up Error code 924 - Access was denied to the remote peer because username and/or password is invalid on the domain.

VPN or Dial-Up Error code 925 - There are no routing enabled ports available for use by this demand dial interface.

VPN or Dial-Up Error code 926 - The port has been disconnected due to inactivity.

VPN or Dial-Up Error code 927 - The interface is not reachable at this time.

VPN or Dial-Up Error code 928 - The Demand Dial service is in a paused state.

VPN or Dial-Up Error code 929 - The interface has been disconnected by the administrator.

VPN or Dial-Up Error code 930 - The authentication server did not respond to authentication requests in a timely fashion.

VPN or Dial-Up Error code 931 - The maximum number of ports allowed for use in the multilinked connection has been reached.

VPN or Dial-Up Error code 932 - The connection time limit for the user has been reached.

VPN or Dial-Up Error code 933 - The maximum limit on the number of LAN interfaces supported has been reached.

VPN or Dial-Up Error code 934 - The maximum limit on the number of Demand Dial interfaces supported has been reached.

VPN or Dial-Up Error code 935 - The maximum limit on the number of Remote Access clients supported has been reached.

VPN or Dial-Up Error code 936 - The port has been disconnected due to the BAP policy.

VPN or Dial-Up Error code 937 - Because another connection of your type is in use, the incoming connection cannot accept your connection request.

VPN or Dial-Up Error code 938 - No RADIUS servers were located on the network.

VPN or Dial-Up Error code 939 - An invalid response was received from the RADIUS authentication server. Make sure that the case sensitive secret password for the RADIUS server is set correctly.

VPN or Dial-Up Error code 940 - You do not have permission to connect at this time.

VPN or Dial-Up Error code 941 - You do not have permission to connect using the current device type.

VPN or Dial-Up Error code 942 - You do not have permission to connect using the selected authentication protocol.

VPN or Dial-Up Error code 943 - BAP is required for this user.

VPN or Dial-Up Error code 944 - The interface is not allowed to connect at this time.

VPN or Dial-Up Error code 945 - The saved router configuration is incompatible with the current router.

VPN or Dial-Up Error code 946 - RemoteAccess has detected older format user accounts that will not be migrated automatically. To migrate these manually, run XXXX.

VPN or Dial-Up Error code 948 - The transport is already installed with the router.

VPN or Dial-Up Error code 949 - Received invalid signature length in packet from RADIUS server.

VPN or Dial-Up Error code 950 - Received invalid signature in packet from RADIUS server.

VPN or Dial-Up Error code 951 - Did not receive signature along with EAPMessage from RADIUS server.

VPN or Dial-Up Error code 952 - Received packet with invalid length or Id from RADIUS server.

VPN or Dial-Up Error code 953 - Received packet with attribute with invalid length from RADIUS server.

VPN or Dial-Up Error code 954 - Received invalid packet from RADIUS server.

VPN or Dial-Up Error code 955 - Authenticator does not match in packet from RADIUS server.